Apply to all bare wood surfaces that may directly, or indirectly be impacted by natural elements/weather. Plants tolerate this product well; however, over exposure as in over watering will eventually suffocate any non-below water surface plant. |
IDEAL FOR: Unpainted structural plywood applications, e.g. roof and wall sheathing, fences, framing, decks and wooden structures that will be painted or water sealed. |
DIRECTIONS: Apply with airless spray gun, roller, or paintbrush. Shake or Stir often. Treated surfaces can be painted when dry to touch. Drying time should not exceed 30-minutes. |
COVERAGE: Typical new construction grade lumber approximately: 1.000SF per-gallon. Dry wood approximately: 750SF per-gallon.
NOTE: Once applied, this product will slightly darken, or stain the appearance of natural or untreated bare wood. In addition to moisturizing and sealing wood surfaces by forming a soft veneer, composition of natural ingredients in product should naturally replace some natural wood moisture that helps to protect bare wood from dry rot and most subsequent insect infestations. |
CAUTION: Avoid direct skin contact with ORANGEWRAP. If ORANGEWRAP Organic Wood Moisturizer and Sealer comes in contact with skin, wash area exposed to product with industrial soap and water. If swallowed, drink at least a quart of water and contact a physician. Product is not poisonous. Ingesting, or swallowing, small amounts may, however, cause diarrhea. |
CONTAINS: Orange oil, patented liquid boric acid flame retardant and a vegetable based methyl ester diluent. |
Treated![]() |
Untreated![]() |
| Produced by: | ORANGEWRAP, LLC | |||
| 1500 Eastman Avenue | ||||
| Ventura, California 93003 | ||||
| 1-800-643-7654 | ||||
| www.OrangeWrap.com |
Cleaner and Deodorizer |
Bare Wood Moisturizer |
Oil-Spill Clean-up |
|
|

